arduino esp8266 编译问题
arduino esp8266 编译问题
主体代码这里
#define BLINKER_MIOT_LIGHT
#define BLINKER_WIFI
#include <Blinker.h>
char auth[] ="密钥"; //换成APP获取到的密匙
char ssid[] = "wifi"; //WiFi账号
char pswd[] = "密码"; //WIFI密码
int GPIO=0;//定义GPIO口用于控制继电器
//#define BUTTON_1 "Key"
BlinkerButton Button1("Key");//这里需要根据自己在BLINKER里面设置的名字进行更改
void button1_callback(const String & state)
{
//BLINKER_LOG("get button state: ", state);
Blinker.vibrate();
if (state=="on") {
//digitalWrite(LED_BUILTIN, LOW);
digitalWrite(GPIO, LOW);
// 反馈开关状态
Button1.print("on");
} else if(state=="off"){
//digitalWrite(LED_BUILTIN, HIGH);
digitalWrite(GPIO, HIGH);
// 反馈开关状态
Button1.print("off");
}
}
void miotPowerState(const String & state)
{
BLINKER_LOG("need set power state: ",state);
if (state == BLINKER_CMD_OFF) {//如果语音接收到是关闭灯就设置GPIO口为高电平
digitalWrite(GPIO, HIGH);
BlinkerMIOT.powerState("off");
BlinkerMIOT.print();
}
else if (state == BLINKER_CMD_ON) {
digitalWrite(GPIO, LOW);
BlinkerMIOT.powerState("on");
BlinkerMIOT.print();
}
}
void setup() {
Serial.begin(115200);
//pinMode(LED_BUILTIN, OUTPUT);
pinMode(GPIO,OUTPUT);
digitalWrite(GPIO,HIGH);//初始化，由于继电器是低电平触发。所以刚开始设为高电平
//digitalWrite(LED_BUILTIN, HIGH);
Blinker.begin(auth, ssid, pswd);
Button1.attach(button1_callback);
BlinkerMIOT.attachPowerState(miotPowerState);//这段代码一定要加，不加小爱同学控制不了,务必在回调函数中反馈该控制状态
}
void loop()
{
Blinker.run();
}
报问题信息
In file included from g:\8266xm\libraries\Blinker\src/BlinkerESPMQTT.h:16,
from g:\8266xm\libraries\Blinker\src/Blinker.h:43,
from G:\8266xm\xxdd8266\xxdd8266.ino:4:
g:\8266xm\libraries\Blinker\src/Adapters/BlinkerMQTT.h: In member function 'virtual char* BlinkerMQTT::token()':
g:\8266xm\libraries\Blinker\src/Adapters/BlinkerMQTT.h:141:50: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
141 | char * token() { if (!isMQTTinit) return ""; else return MQTT_KEY_MQTT; }
| ^~
In file included from g:\8266xm\libraries\Blinker\src/BlinkerESPMQTT.h:16,
from g:\8266xm\libraries\Blinker\src/Blinker.h:43,
from G:\8266xm\xxdd8266\xxdd8266.ino:4:
g:\8266xm\libraries\Blinker\src/Adapters/BlinkerMQTT.h: In member function 'virtual char* BlinkerMQTT::lastRead()':
g:\8266xm\libraries\Blinker\src/Adapters/BlinkerMQTT.h:954:17: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
954 | else return "";
| ^~
In file included from g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h:95,
from g:\8266xm\libraries\Blinker\src/BlinkerESPMQTT.h:17,
from g:\8266xm\libraries\Blinker\src/Blinker.h:43,
from G:\8266xm\xxdd8266\xxdd8266.ino:4:
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApiBase.h: In member function 'char* BlinkerBridge_key::getName()':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApiBase.h:196:29: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
196 | else return "false";
| ^~~~~~~
In file included from g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h:96,
from g:\8266xm\libraries\Blinker\src/BlinkerESPMQTT.h:17,
from g:\8266xm\libraries\Blinker\src/Blinker.h:43,
from G:\8266xm\xxdd8266\xxdd8266.ino:4:
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerProtocol.h: In member function 'char* BlinkerProtocol::deviceName()':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerProtocol.h:104:86: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
104 | char * deviceName() { if (isInit) return conn->deviceName(); else return ""; }
| ^~
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerProtocol.h: In member function 'char* BlinkerProtocol::authKey()':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerProtocol.h:105:83: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
105 | char * authKey() { if (isInit) return conn->authKey(); else return ""; }
| ^~
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerProtocol.h: In member function 'char* BlinkerProtocol::token()':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerProtocol.h:106:79: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
106 | char * token() { if (isInit) return conn->token(); else return ""; }
| ^~
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerProtocol.h: In member function 'char* BlinkerProtocol::dataParse()':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerProtocol.h:257:86: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
257 | char* dataParse() { if (canParse) return conn->lastRead(); else return ""; }
| ^~
In file included from g:\8266xm\libraries\Blinker\src/Adapters/BlinkerMQTT.h:46,
from g:\8266xm\libraries\Blinker\src/BlinkerESPMQTT.h:16,
from g:\8266xm\libraries\Blinker\src/Blinker.h:43,
from G:\8266xm\xxdd8266\xxdd8266.ino:4:
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h: At global scope:
g:\8266xm\libraries\blinker\src\blinker\blinkerconfig.h:226:41: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
226 | #define BLINKER_CMD_BUILTIN_SWITCH "switch"
| ^~~~~~~~
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h:913:71: note: in expansion of macro 'BLINKER_CMD_BUILTIN_SWITCH'
913 | BlinkerWidgets_string _BUILTIN_SWITCH = BlinkerWidgets_string(BLINKER_CMD_BUILTIN_SWITCH);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from g:\8266xm\libraries\Blinker\src/BlinkerESPMQTT.h:17,
from g:\8266xm\libraries\Blinker\src/Blinker.h:43,
from G:\8266xm\xxdd8266\xxdd8266.ino:4:
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::bridgeKey(uint8_t)':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h:7831:21: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
7831 | else return "";
| ^~
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::bridgeName(uint8_t)':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h:7838:21: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
7838 | else return "false";
| ^~~~~~~
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::widgetName_str(uint8_t)':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h:8467:17: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
8467 | else return "";
| ^~
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::widgetName_joy(uint8_t)':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h:8474:21: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
8474 | else return "";
| ^~
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::widgetName_rgb(uint8_t)':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h:8481:17: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
8481 | else return "";
| ^~
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::widgetName_int(uint8_t)':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h:8487:17: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
8487 | else return "";
| ^~
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::widgetName_tab(uint8_t)':
g:\8266xm\libraries\Blinker\src/Blinker/BlinkerApi.h:8493:17: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
8493 | else return "";
| ^~
G:\8266xm\xxdd8266\xxdd8266.ino: At global scope:
G:\8266xm\xxdd8266\xxdd8266.ino:15:23: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
15 | BlinkerButton Button1("Key");//这里需要根据自己在BLINKER里面设置的名字进行更改
| ^~~~~
In file included from g:\8266xm\libraries\Blinker\src\modules\painlessMesh\scheduler.cpp:15:
g:\8266xm\libraries\blinker\src\modules\taskscheduler\taskscheduler.h: In member function 'bool Scheduler::execute()':
g:\8266xm\libraries\blinker\src\modules\taskscheduler\taskscheduler.h:872:28: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
872 | register unsigned long m, i; // millis, interval;
| ^
g:\8266xm\libraries\blinker\src\modules\taskscheduler\taskscheduler.h:872:31: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
872 | register unsigned long m, i; // millis, interval;
| ^
- 文章：树莓派+arduino实现简单物联网开发（三）arduino连接esp8266控制电器 中也许有你想要的答案，请看下吧
- 除此之外, 这篇博客: Arduino搭建Esp8266开发环境（两种方法）中的 Arduino搭建Esp8266开发环境 部分也许能够解决你的问题, 你可以仔细阅读以下内容或跳转源博客中阅读:
简介: ESP8266是一款串口WiFi模块,内部集成MCU能实现单片机之间串口同信;这款模块简单易学,体积小,便于嵌入式开发。
ESP8266的编程方式可以用官方的SDK编写，也可以用Arduino编写。各有各自的优点。
1. 在ArduinoIDE里面进行下载
然后我们在首选项这一个界面输入以下链接：
http://arduino.esp8266.com/stable/package_esp8266com_index.json
然后打开开发板管理器
搜索8266
然后在工具->管理库里面：
需要注意的是下面的可能会报错原因可能是服务器问题。
然后我们输入8266就可以找到该库了
点安装后我们就可以看到开发板了,选中后即可对8266编程;
最后我们编译后烧录进去，显示成功！2.通过工具对8266进行安装,推荐用这种方法！
然后就安装完成了,
点安装后我们就可以看到开发板了,选中后即可对8266编程;
最后我们编译后烧录进去，显示成功！
需要该软件可以关注公众号:智慧小巷
回复:Arduino一键安装8266
即可！
感谢阅读！
以下是编译错误的解决方案：
第一种可能出现的错误是缺少库文件，这个需要先检查Blinker库是否正确安装，并在代码中添加头文件#include <Blinker.h>。
第二种可能出现的错误是关于GPIO口的定义问题，需要确定使用的GPIO口对应的引脚号，并将其定义为int类型的变量，比如GPIO=2，然后在setup函数中调用pinMode(GPIO,OUTPUT);来将其设置为输出模式。
第三种可能出现的错误是关于BLINKER_LOG宏定义的问题，如果没有定义这个宏，则需要将所有调试信息的输出改为使用Serial.print或Serial.println来实现。
第四种可能出现的错误是关于attachPowerState函数的问题，如果没有正确的调用BlinkerMIOT.attachPowerState(miotPowerState);，则小爱同学无法控制设备的状态，需要检查这个函数的调用是否正确。
用arduino编译esp8266代码报错No such file or directory如何解决
可以借鉴下
https://blog.csdn.net/Reasally/article/details/123313509
主要是一些警告信息，warning: ISO C++ forbids converting a string constant to 'char*'的意思就是禁止将字符串常量转换为“char ”，检查下你的代码中，将这种形式的定义：
stu.name="zhangsan";
修改为：
char name = (char*)"zhangsan";
其次检查下Blinker这个库，以及其他使用到的库文件是否正确引入
这个是警告不是报错，可以正常运行