单片机仿真器的魔法棒工具设置问题

keil5同一个程序，一样的仿真器和开发板，之前测试可以点灯，程序目录文件名什么也没动，现在没办法点亮了，不知到哪里设置出了问题。有没有懂的朋友帮忙看看了。
keil5偶尔出现一个警告弹框如图

img

keil5版本号

img

魔法棒工具设置

img

img

烧录程序后这个是提示，翻译过了，提示也都是正常的了

Build started: Project: BH-F103
*** Using Compiler 'V5.06 update 7 (build 960)', folder: 'C:\Keil_v5\ARM\ARMCompiler506\Bin'
Build target 'Target 1'
".\Objects\BH-F103.axf" - 0 Error(s), 0 Warning(s).
Build Time Elapsed: 00:00:00
Load "C:\Users\admin\Desktop\k5test.anli\Fwlib-Template.moban\Project\Objects\BH-F103.axf"
Set JLink Project File to "C:\Users\admin\Desktop\k5test.anli\Fwlib-Template.moban\Project\JLinkSettings.ini"

  • JLink Info: Device "STM32F103ZE" selected.

DLL: V7.64 , compiled Apr 1 2022 16:04:43
Firmware: J-Link ARM V8 compiled Jan 31 2018 18:34:52
Hardware: V8.00
S/N : 20080643
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull

  • JLink Info: InitTarget() start
  • JLink Info: TotalIRLen = 9, IRPrint = 0x0011
  • JLink Info: JTAG chain detection found 2 devices:
  • JLink Info: #0 Id: 0x3BA00477, IRLen: 04, CoreSight JTAG-DP
  • JLink Info: #1 Id: 0x06414041, IRLen: 05, STM32 Boundary Scan
  • JLink Info: InitTarget() end
  • JLink Info: TotalIRLen = 9, IRPrint = 0x0011
  • JLink Info: JTAG chain detection found 2 devices:
  • JLink Info: #0 Id: 0x3BA00477, IRLen: 04, CoreSight JTAG-DP
  • JLink Info: #1 Id: 0x06414041, IRLen: 05, STM32 Boundary Scan
  • JLink Info: DPv0 detected
  • JLink Info: CoreSight SoC-400 or earlier
  • JLink Info: Scanning AP map to find all available APs
  • JLink Info: AP[1]: Stopped AP scan as end of AP map has been reached
  • JLink Info: AP[0]: AHB-AP (IDR: 0x14770011)
  • JLink Info: Iterating through AP map to find AHB-AP to use
  • JLink Info: AP[0]: Core found
  • JLink Info: AP[0]: AHB-AP ROM base: 0xE00FF000
  • JLink Info: CPUID register: 0x411FC231. Implementer code: 0x41 (ARM)
  • JLink Info: Found Cortex-M3 r1p1, Little endian.
  • JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
  • JLink Info: CoreSight components:
  • JLink Info: ROMTbl[0] @ E00FF000
  • JLink Info: [0][0]: E000E000 CID B105E00D PID 001BB000 SCS
  • JLink Info: [0][1]: E0001000 CID B105E00D PID 001BB002 DWT
  • JLink Info: [0][2]: E0002000 CID B105E00D PID 000BB003 FPB
  • JLink Info: [0][3]: E0000000 CID B105E00D PID 001BB001 ITM
  • JLink Info: [0][4]: E0040000 CID B105900D PID 001BB923 TPIU-Lite
  • JLink Info: [0][5]: E0041000 CID B105900D PID 101BB924 ETM-M3
    ROMTableAddr = 0xE00FF000
  • JLink Info: Reset: Halt core after reset via DEMCR.VC_CORERESET.
  • JLink Info: Reset: Reset device via AIRCR.SYSRESETREQ.

Target info:

Device: STM32F103ZE
VTarget = 3.287V
State of Pins:
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints: 4
JTAG speed: 4800 kHz

Erase Done.
Programming Done.
Verify OK.

  • JLink Info: Reset: Halt core after reset via DEMCR.VC_CORERESET.
  • JLink Info: Reset: Reset device via AIRCR.SYSRESETREQ.
    Application running ...
    Flash Load finished at 12:58:30