关于用c语言将ESP-32两个示例融合在一起的问题

本人将esp32示例和第五段网上的睡眠代码模式融合在一起。想要实现实时监控功能，在不用的时候启用休眠功能，用手机连接网络IP地址唤醒，但是第五段代码频繁报错，求解决方案，谢谢。

代码如下

#include "esp_camera.h"
#include <WiFi.h>

//
// WARNING!!! PSRAM IC required for UXGA resolution and high JPEG quality
//            Ensure ESP32 Wrover Module or other board with PSRAM is selected
//            Partial images will be transmitted if image exceeds buffer size
//

// Select camera model
//#define CAMERA_MODEL_WROVER_KIT // Has PSRAM
//#define CAMERA_MODEL_ESP_EYE // Has PSRAM
//#define CAMERA_MODEL_M5STACK_PSRAM // Has PSRAM
//#define CAMERA_MODEL_M5STACK_V2_PSRAM // M5Camera version B Has PSRAM
//#define CAMERA_MODEL_M5STACK_WIDE // Has PSRAM
//#define CAMERA_MODEL_M5STACK_ESP32CAM // No PSRAM
#define CAMERA_MODEL_AI_THINKER // Has PSRAM
//#define CAMERA_MODEL_TTGO_T_JOURNAL // No PSRAM

#include "camera_pins.h"

const char* ssid = "HUAWEI-1101";
const char* password = "13928884992";

void startCameraServer();

void setup() {
  Serial.begin(115200);
  Serial.setDebugOutput(true);
  Serial.println();

  camera_config_t config;
  config.ledc_channel = LEDC_CHANNEL_0;
  config.ledc_timer = LEDC_TIMER_0;
  config.pin_d0 = Y2_GPIO_NUM;
  config.pin_d1 = Y3_GPIO_NUM;
  config.pin_d2 = Y4_GPIO_NUM;
  config.pin_d3 = Y5_GPIO_NUM;
  config.pin_d4 = Y6_GPIO_NUM;
  config.pin_d5 = Y7_GPIO_NUM;
  config.pin_d6 = Y8_GPIO_NUM;
  config.pin_d7 = Y9_GPIO_NUM;
  config.pin_xclk = XCLK_GPIO_NUM;
  config.pin_pclk = PCLK_GPIO_NUM;
  config.pin_vsync = VSYNC_GPIO_NUM;
  config.pin_href = HREF_GPIO_NUM;
  config.pin_sscb_sda = SIOD_GPIO_NUM;
  config.pin_sscb_scl = SIOC_GPIO_NUM;
  config.pin_pwdn = PWDN_GPIO_NUM;
  config.pin_reset = RESET_GPIO_NUM;
  config.xclk_freq_hz = 20000000;
  config.pixel_format = PIXFORMAT_JPEG;
  
  // if PSRAM IC present, init with UXGA resolution and higher JPEG quality
  //                      for larger pre-allocated frame buffer.
  if(psramFound()){
    config.frame_size = FRAMESIZE_UXGA;
    config.jpeg_quality = 10;
    config.fb_count = 2;
  } else {
    config.frame_size = FRAMESIZE_SVGA;
    config.jpeg_quality = 12;

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "esp_http_server.h"
#include "esp_timer.h"
#include "esp_camera.h"
#include "img_converters.h"
#include "camera_index.h"
#include "Arduino.h"

#include "fb_gfx.h"
#include "fd_forward.h"
#include "fr_forward.h"

#define ENROLL_CONFIRM_TIMES 5
#define FACE_ID_SAVE_NUMBER 7

#define FACE_COLOR_WHITE  0x00FFFFFF
#define FACE_COLOR_BLACK  0x00000000
#define FACE_COLOR_RED    0x000000FF
#define FACE_COLOR_GREEN  0x0000FF00
#define FACE_COLOR_BLUE   0x00FF0000
#define FACE_COLOR_YELLOW (FACE_COLOR_RED | FACE_COLOR_GREEN)
#define FACE_COLOR_CYAN   (FACE_COLOR_BLUE | FACE_COLOR_GREEN)
#define FACE_COLOR_PURPLE (FACE_COLOR_BLUE | FACE_COLOR_RED)

typedef struct {
        size_t size; //number of values used for filtering
        size_t index; //current value index
        size_t count; //value count
        int sum;
        int * values; //array to be filled with values
} ra_filter_t;

typedef struct {
        httpd_req_t *req;
        size_t len;
} jpg_chunking_t;

#define PART_BOUNDARY "123456789000000000000987654321"
static const char* _STREAM_CONTENT_TYPE = "multipart/x-mixed-replace;boundary=" PART_BOUNDARY;
static const char* _STREAM_BOUNDARY = "\r\n--" PART_BOUNDARY "\r\n";
static const char* _STREAM_PART = "Content-Type: image/jpeg\r\nContent-Length: %u\r\n\r\n";

static ra_filter_t ra_filter;
httpd_handle_t stream_httpd = NULL;
httpd_handle_t 

//File: index_ov2640.html.gz, Size: 4316
#define index_ov2640_html_gz_len 4316
const uint8_t index_ov2640_html_gz[] = {
 0x1F, 0x8B, 0x08, 0x08, 0x50, 0x5C, 0xAE, 0x5C, 0x00, 0x03, 0x69, 0x6E, 0x64, 0x65, 0x78, 0x5F,
 0x6F, 0x76, 0x32, 0x36, 0x34, 0x30, 0x2E, 0x68, 0x74, 0x6D, 0x6C, 0x00, 0xE5, 0x5D, 0x7B, 0x73,
 0xD3, 0xC6, 0x16, 0xFF, 0x9F, 0x4F, 0x21, 0x04, 0x25, 0xF6, 0x34, 0x76, 0x6C, 0xC7, 0x84, 0xE0,
 0xDA, 0xE2, 0x42, 0x08, 0xD0, 0x19, 0x5E, 0x25, 0x2D, 0x74, 0xA6, 0xD3, 0x81, 0xB5, 0xB4, 0xB2,
 0x55, 0x64, 0xC9, 0x95, 0x56, 0x76, 0x52, 0x26, 0x9F, 0xE3, 0x7E, 0xA0, 0xFB, 0xC5, 0xEE, 0xD9,
 0x87, 0xA4, 0x95, 0xBC, 0x7A, 0xD8, 0x26, 0x36, 0x97, 0xEB, 0xCC, 0x14, 0xD9, 0xDA, 0x73, 0xF6,
 0x9C, 0xF3, 0x3B, 0xAF, 0x5D, 0x3D, 0x3A, 0xBC, 0x6D, 0xF9, 0x26, 0xB9, 0x9A, 0x63, 0x6D, 0x4A,
 0x66, 0xAE, 0x71, 0x6B, 0xC8, 0xFF, 0xD1, 0xE0, 0x33, 0x9C, 0x62, 0x64, 0xF1, 0x43, 0xF6, 0x75,
 0x86, 0x09, 0xD2, 0xCC, 0x29, 0x0A, 0x42, 0x4C, 0x46, 0x7A, 0x44, 0xEC, 0xD6, 0xA9, 0x9E, 0x3F,
 0xED, 0xA1, 0x19, 0x1E, 0xE9, 0x0B, 0x07, 0x2F, 0xE7, 0x7E, 0x40, 0x74, 0xCD, 0xF4, 0x3D, 0x82,
 0x3D, 0x18, 0xBE, 0x74, 0x2C, 0x32, 0x1D, 0x59, 0x78, 0xE1, 0x98, 0xB8, 0xC5, 0xBE, 0x1C, 0x3A,
 0x9E, 0x43, 0x1C, 0xE4, 0xB6, 0x42, 0x13, 0xB9, 0x78, 0xD4, 0x95, 0x79, 0x11, 0x87, 0xB8, 0xD8,
 0x38, 0xBF, 0x78, 0x7B, 0xDC, 0xD3, 0xDE, 0xBC, 0xEF, 0xF5, 0x4F, 0x3A, 0xC3, 0x23, 0xFE, 0x5B,
 0x3A, 0x26, 0x24, 0x57, 0xF2, 0x77, 0xFA, 0x19, 0xFB, 0xD6, 0x95, 0xF6, 0x25, 0xF3, 0x13, 0xFD,
 0xD8, 0x20, 0x44, 0xCB, 0x46, 0x33, 0xC7, 0xBD, 0x1A, 0x68, 0x8F, 0x03, 0x98, 0xF3, 0xF0, 0x05,
 0x76, 0x17, 0x98, 0x38, 0x26, 0x3A, 0x0C, 0x91, 0x17, 0xB6, 0x42, 0x1C, 0x38, 0xF6, 0x4F, 0x2B,
 0x84, 0x63, 0x64, 0x7E, 0x9E, 0x04, 0x7E, 0xE4, 0x59, 0x03, 0xED, 0x4E, 0xF7, 0x94, 0xFE, 0xAD,
 0x0E, 0x32, 0x7D, 0xD7, 0x0F, 0xE0, 0xFC, 0xF9, 0x33, 0xFA, 0xB7, 0x7A, 0x9E, 0xCD, 0x1E, 0x3A,
 0xFF, 0xE0, 0x81, 0xD6, 0x3D, 0x99, 0x5F, 0x66, 0xCE, 0x5F, 0xDF, 0xCA, 0x7C, 0x9D, 0xF6, 0x8A,
 0xA4, 0x17, 0xF4, 0xA7, 0xE5, 0xF4, 0x21, 0x36, 0x89, 0xE3, 

#if defined(CAMERA_MODEL_WROVER_KIT)
#define PWDN_GPIO_NUM    -1
#define RESET_GPIO_NUM   -1
#define XCLK_GPIO_NUM    21
#define SIOD_GPIO_NUM    26
#define SIOC_GPIO_NUM    27

#define Y9_GPIO_NUM      35
#define Y8_GPIO_NUM      34
#define Y7_GPIO_NUM      39
#define Y6_GPIO_NUM      36
#define Y5_GPIO_NUM      19
#define Y4_GPIO_NUM      18
#define Y3_GPIO_NUM       5
#define Y2_GPIO_NUM       4
#define VSYNC_GPIO_NUM   25
#define HREF_GPIO_NUM    23
#define PCLK_GPIO_NUM    22

#elif defined(CAMERA_MODEL_ESP_EYE)
#define PWDN_GPIO_NUM    -1
#define RESET_GPIO_NUM   -1
#define XCLK_GPIO_NUM    4
#define SIOD_GPIO_NUM    18
#define SIOC_GPIO_NUM    23

#define Y9_GPIO_NUM      36
#define Y8_GPIO_NUM      37
#define Y7_GPIO_NUM      38
#define Y6_GPIO_NUM      39
#define Y5_GPIO_NUM      35
#define Y4_GPIO_NUM      14
#define Y3_GPIO_NUM      13
#define Y2_GPIO_NUM      34
#define VSYNC_GPIO_NUM   5
#define HREF_GPIO_NUM    27
#define PCLK_GPIO_NUM    25

#elif defined(CAMERA_MODEL_M5STACK_PSRAM)
#define PWDN_GPIO_NUM     -1
#define RESET_GPIO_NUM    15
#define XCLK_GPIO_NUM     27
#define SIOD_GPIO_NUM     25
#define SIOC_GPIO_NUM     23

#define Y9_GPIO_NUM       19
#define Y8_GPIO_NUM       36
#define Y7_GPIO_NUM       18
#define Y6_GPIO_NUM       39
#define Y5_GPIO_NUM        5
#define Y4_GPIO_NUM       34
#define Y3_GPIO_NUM       35
#define Y2_GPIO_NUM       32
#define VSYNC_GPIO_NUM    22
#define HREF_GPIO_NUM     26
#define PCLK_GPIO_NUM     21

#elif defined(CAMERA_MODEL_M5STACK_V2_PSRAM)
#define PWDN_GPIO_NUM     -1
#define RESET_GPIO_NUM    15
#define XCLK_GPIO_NUM     27
#define SIOD_GPIO_NUM     22
#define SIOC_GPIO_NUM     23

#define Y9_GPIO_NUM       19
#define Y8_GPIO_NUM       36
#define Y7_GPIO_NUM       18
#define Y6_GPIO_NUM       39
#define Y5_GPIO_NUM        5
#define Y4_GPIO_NUM       34
#define Y3_GPIO_NUM       35
#define Y2_GPIO_NUM       32
#define VSYNC_GPIO_NUM    25
#define HREF_GPIO_NUM     26
#define PCLK

这是频繁报错的第五段代码，困扰了我好久也没解决。

#define uS_TO_S_FACTOR 1000000ULL  
#define TIME_TO_SLEEP  (5)        //
RTC_DATA_ATTR int bootCount = 0;


void print_wakeup_reason() {
  esp_sleep_wakeup_cause_t wakeup_reason;

  wakeup_reason = esp_sleep_get_wakeup_cause();

  switch (wakeup_reason)
  {
    case ESP_SLEEP_WAKEUP_EXT0 : Serial.println("use RTC_IO outside message to cause"); break;
    case ESP_SLEEP_WAKEUP_EXT1 : Serial.println("use RTC_CNTL outside message to cause"); break;
    case ESP_SLEEP_WAKEUP_TIMER : Serial.println("cause by timer"); break;
    case ESP_SLEEP_WAKEUP_TOUCHPAD : Serial.println("cause by touch"); break;
    case ESP_SLEEP_WAKEUP_ULP : Serial.println("ULP program to wake up"); break;
    default : Serial.printf("wake up do not cause by deep sleep: %d\n", wakeup_reason); break;
  }
}

void setup() {
  Serial.begin(115200);
  delay(1000); //
  
  ++bootCount;
  Serial.println("Boot number: " + String(bootCount));

  //Print the wakeup reason for ESP32
  print_wakeup_reason();

  
  esp_sleep_enable_timer_wakeup(TIME_TO_SLEEP * uS_TO_S_FACTOR);
  Serial.println("Setup ESP32 to sleep for every " + String(TIME_TO_SLEEP) +
                 " Seconds");

 
  //esp_deep_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_OFF);
  //Serial.println("Configured all RTC Peripherals to be powered down in sleep");

 
  Serial.println("ESP-32 is going to sleep");
  Serial.flush();
  esp_deep_sleep_start();
  Serial.println("this will never going to be print");
}

void loop() {
 
}

【ESP32定时器睡眠模式】https://mbd.baidu.com/ma/s/B34niRVE