root@127.0.0.1's password:
____ _ _ _ _
/ ___| |__ __ _ _ __ (_) __| | ___| |__ _____ __
| | | '_ \ / _` | '_ \| |/ _` |/ _ \ '_ \ / _ \ \/ /
| |___| | | | (_| | | | | | (_| | __/ |_) | (_) > <
\____|_| |_|\__,_|_| |_|_|\__,_|\___|_.__/ \___/_/\_\
Welcome to Armbian Stretch with Linux 5.4.2-rockchip64
System load: 0.12 0.06 0.08 Up time: 28 min
Memory usage: 44 % of 982MB Zram usage: 8 % of 491Mb IP: 192.168.101.24
CPU temp: 57°C
Usage of /: 79% of 7.0G storage/: 1% of 2.7T
Last login: Tue Jan 25 13:23:59 2022 from 127.0.0.1
root@Chainedbox:~# sudo tail -n 100 -f /var/log/cups/error_log
D [25/Jan/2022:13:54:22 +0800] [Job 85] envp[23]="DEVICE_URI=usb://HP/LaserJet%20MFP%20M129-M134?serial=VNFVG04495"
D [25/Jan/2022:13:54:22 +0800] [Job 85] envp[24]="PRINTER_INFO=HP LaserJet MFP M129-M134"
D [25/Jan/2022:13:54:22 +0800] [Job 85] envp[25]="PRINTER_LOCATION=Local Printer"
D [25/Jan/2022:13:54:22 +0800] [Job 85] envp[26]="PRINTER=HP_LaserJet_MFP_M129-M134"
D [25/Jan/2022:13:54:22 +0800] [Job 85] envp[27]="PRINTER_STATE_REASONS=none"
D [25/Jan/2022:13:54:22 +0800] [Job 85] envp[28]="CUPS_FILETYPE=document"
D [25/Jan/2022:13:54:22 +0800] [Job 85] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-pdf"
D [25/Jan/2022:13:54:22 +0800] [Job 85] envp[30]="AUTH_I****"
D [25/Jan/2022:13:54:22 +0800] [Job 85] Started filter /usr/lib/cups/filter/bannertopdf (PID 5975)
D [25/Jan/2022:13:54:22 +0800] [Job 85] Started filter /usr/lib/cups/filter/pdftopdf (PID 5976)
D [25/Jan/2022:13:54:22 +0800] [Job 85] Started filter /usr/lib/cups/filter/foomatic-rip (PID 5977)
D [25/Jan/2022:13:54:22 +0800] [Job 85] Started backend /usr/lib/cups/backend/usb (PID 5978)
D [25/Jan/2022:13:54:22 +0800] [Job 85] Loading USB quirks from \"/usr/share/cups/usb\".
D [25/Jan/2022:13:54:22 +0800] [Job 85] Loaded 80 quirks.
D [25/Jan/2022:13:54:22 +0800] [Job 85] Printing on printer with URI: usb://HP/LaserJet%20MFP%20M129-M134?serial=VNFVG04495
D [25/Jan/2022:13:54:22 +0800] [Job 85] pdftopdf: Last filter determined by the PPD: foomatic-rip; FINAL_CONTENT_TYPE: application/vnd.cups-pdf => pdftopdf will log pages in page_log.
D [25/Jan/2022:13:54:22 +0800] [Job 85] libusb_get_device_list=9
D [25/Jan/2022:13:54:22 +0800] [Job 85] STATE: +connecting-to-device
D [25/Jan/2022:13:54:22 +0800] [Job 85] STATE: -connecting-to-device
D [25/Jan/2022:13:54:22 +0800] [Job 85] Printer found with device ID: MFG:HP;CMD:PJL,PML,URP;MDL:HP LaserJet MFP M129-M134;CLS:PRINTER;DES:HP LaserJet MFP M132a;MEM:MEM=110MB;PRN:G3Q61A;COMMENT:RES=600x1;LEDMDIS:USB#ff#04#01;CID:HPLJPCLMSMV1;IPP-E:FF-04-01,FF-04-01,FF-09-01,FF-09-01;eSCL:FF-04-01,FF-04-01,FF-09-01,FF-09-01;MCT:MF;MCL:DL;MCV:2.0; Device URI: usb://HP/LaserJet%20MFP%20M129-M134?serial=VNFVG04495
D [25/Jan/2022:13:54:22 +0800] [Job 85] Device protocol: 2
D [25/Jan/2022:13:54:22 +0800] [Job 85] Sending data to printer.
D [25/Jan/2022:13:54:22 +0800] [Job 85] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [25/Jan/2022:13:54:22 +0800] [Job 85] Calling FindDeviceById(cups-HP_LaserJet_MFP_M129-M134)
D [25/Jan/2022:13:54:22 +0800] [Job 85] Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
D [25/Jan/2022:13:54:22 +0800] [Job 85] Failed to get find device cups-HP_LaserJet_MFP_M129-M134
D [25/Jan/2022:13:54:22 +0800] [Job 85] \'CM Color Calibration\' Mode in SPOOLER-LESS: Off
D [25/Jan/2022:13:54:22 +0800] [Job 85] Getting input from file
D [25/Jan/2022:13:54:22 +0800] [Job 85] foomatic-rip version 1.11.6 running...
D [25/Jan/2022:13:54:22 +0800] [Job 85] Parsing PPD file ...
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option ColorSpace
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option Resolution
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option PageSize
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option Model
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option PrintoutMode
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option MediaType
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option InputSlot
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option Quality
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option ImageableArea
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option PaperDimension
D [25/Jan/2022:13:54:22 +0800] [Job 85] Added option Font
D [25/Jan/2022:13:54:22 +0800] [Job 85] Parameter Summary
D [25/Jan/2022:13:54:22 +0800] [Job 85] -----------------
D [25/Jan/2022:13:54:22 +0800] [Job 85] Spooler: cups
D [25/Jan/2022:13:54:22 +0800] [Job 85] Printer: HP_LaserJet_MFP_M129-M134
D [25/Jan/2022:13:54:22 +0800] [Job 85] Shell: /bin/sh
D [25/Jan/2022:13:54:22 +0800] [Job 85] PPD file: /etc/cups/ppd/HP_LaserJet_MFP_M129-M134.ppd
D [25/Jan/2022:13:54:22 +0800] [Job 85] ATTR file:
D [25/Jan/2022:13:54:22 +0800] [Job 85] Printer model: HP LaserJet MFP m129-m134 hpijs, 3.16.11
D [25/Jan/2022:13:54:22 +0800] [Job 85] Job title: Test Page
D [25/Jan/2022:13:54:22 +0800] [Job 85] File(s) to be printed:
D [25/Jan/2022:13:54:22 +0800] [Job 85] <STDIN>
D [25/Jan/2022:13:54:22 +0800] [Job 85] Ghostscript extra search path (\'GS_LIB\'): /usr/share/cups/fonts
D [25/Jan/2022:13:54:22 +0800] [Job 85] Printing system options:
D [25/Jan/2022:13:54:22 +0800] [Job 85] Pondering option \'job-uuid=urn:uuid:b7e681cb-0fe1-3e60-5560-cf4a91db6f4d\'
D [25/Jan/2022:13:54:22 +0800] [Job 85] Unknown option job-uuid=urn:uuid:b7e681cb-0fe1-3e60-5560-cf4a91db6f4d.
D [25/Jan/2022:13:54:22 +0800] [Job 85] Pondering option \'job-originating-host-name=localhost\'
D [25/Jan/2022:13:54:22 +0800] [Job 85] Unknown option job-originating-host-name=localhost.
D [25/Jan/2022:13:54:22 +0800] [Job 85] Pondering option \'date-time-at-creation=\'
D [25/Jan/2022:13:54:22 +0800] [Job 85] Unknown option date-time-at-creation=.
D [25/Jan/2022:13:54:22 +0800] [Job 85] Pondering option \'date-time-at-processing=\'
D [25/Jan/2022:13:54:22 +0800] [Job 85] Unknown option date-time-at-processing=.
D [25/Jan/2022:13:54:22 +0800] [Job 85] Pondering option \'time-at-creation=1643090061\'
D [25/Jan/2022:13:54:22 +0800] [Job 85] Unknown option time-at-creation=1643090061.
D [25/Jan/2022:13:54:22 +0800] [Job 85] Pondering option \'time-at-processing=1643090061\'
D [25/Jan/2022:13:54:22 +0800] [Job 85] Unknown option time-at-processing=1643090061.
D [25/Jan/2022:13:54:22 +0800] [Job 85] CM Color Calibration Mode in CUPS: Off
D [25/Jan/2022:13:54:22 +0800] [Job 85] Options from the PPD file:
D [25/Jan/2022:13:54:22 +0800] [Job 85] ================================================
D [25/Jan/2022:13:54:22 +0800] [Job 85] File: <STDIN>
D [25/Jan/2022:13:54:22 +0800] [Job 85] ================================================
D [25/Jan/2022:13:54:22 +0800] [Job 85] PDF template file doesn\'t have form. It\'s okay.
D [25/Jan/2022:13:54:22 +0800] [Job 85] PID 5975 (/usr/lib/cups/filter/bannertopdf) exited with no errors.
D [25/Jan/2022:13:54:22 +0800] [Job 85] PAGE: 1 1
D [25/Jan/2022:13:54:22 +0800] [Job 85] Filetype: PDF
D [25/Jan/2022:13:54:22 +0800] [Job 85] Storing temporary files in /var/spool/cups/tmp
D [25/Jan/2022:13:54:22 +0800] [Job 85] PID 5976 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [25/Jan/2022:13:54:22 +0800] [Job 85] File contains 1 pages
D [25/Jan/2022:13:54:22 +0800] [Job 85] Starting renderer with command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -dNOINTERPOLATE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sDeviceManufacturer=\"HEWLETT-PACKARD\" -sDeviceModel=\"HP Color LaserJet 2600n\" -r600 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:PenSet=2,PS:MediaPosition=7 -dIjsUseOutputFD -sOutputFile=- /var/spool/cups/tmp/foomatic-uUh2B0
D [25/Jan/2022:13:54:22 +0800] [Job 85] Starting process \"kid3\" (generation 1)
D [25/Jan/2022:13:54:22 +0800] [Job 85] Starting process \"kid4\" (generation 2)
D [25/Jan/2022:13:54:22 +0800] [Job 85] Starting process \"renderer\" (generation 2)
D [25/Jan/2022:13:54:22 +0800] [Job 85] JCL: \033%-12345X@PJL
D [25/Jan/2022:13:54:22 +0800] [Job 85] <job data>
D [25/Jan/2022:13:54:22 +0800] [Job 85] **** Unable to open the initial device, quitting.
D [25/Jan/2022:13:54:22 +0800] [Job 85] renderer exited with status 1
D [25/Jan/2022:13:54:22 +0800] [Job 85] Possible error on renderer command line or PostScript error. Check options.Kid3 exit status: 3
D [25/Jan/2022:13:54:22 +0800] [Job 85] Sent 0 bytes...
D [25/Jan/2022:13:54:22 +0800] [Job 85] PID 5977 (/usr/lib/cups/filter/foomatic-rip) stopped with status 9.
D [25/Jan/2022:13:54:22 +0800] [Job 85] Hint: Try setting the LogLevel to "debug" to find out more.
D [25/Jan/2022:13:54:22 +0800] [Job 85] Waiting for read thread to exit...
D [25/Jan/2022:13:54:22 +0800] [Job 85] PID 5978 (/usr/lib/cups/backend/usb) exited with no errors.
D [25/Jan/2022:13:54:22 +0800] [Job 85] End of messages
D [25/Jan/2022:13:54:22 +0800] [Job 85] printer-state=3(idle)
D [25/Jan/2022:13:54:22 +0800] [Job 85] printer-state-message="Filter failed"
D [25/Jan/2022:13:54:22 +0800] [Job 85] printer-state-reasons=none
E [25/Jan/2022:13:54:23 +0800] [Client 90] Unable to encrypt connection: A TLS fatal alert has been received.
E [25/Jan/2022:13:54:26 +0800] [Client 92] Unable to encrypt connection: A TLS fatal alert has been received.
E [25/Jan/2022:13:54:29 +0800] [Client 94] Unable to encrypt connection: A TLS fatal alert has been received.
E [25/Jan/2022:13:55:07 +0800] [Client 96] Unable to encrypt connection: A TLS fatal alert has been received.
----------------------------------------------------------------------------------------------------------------------------------------------
hp-check
Saving output in log file: /root/hp-check.log
HP Linux Imaging and Printing System (ver. 3.16.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to
determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already
built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile-
and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 2-9.13 version is not supported. Using 2-8.6 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.2-rockchip64 #19.11.3 SMP PREEMPT Wed Dec 11 18:03:10 CST 2019 GNU/Linux
Host: Chainedbox
Proc: 5.4.2-rockchip64 #19.11.3 SMP PREEMPT Wed Dec 11 18:03:10 CST 2019 GNU/Linux
Distribution: 2 9.13
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.16.11
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 2 distro 9.13 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.16.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.16.11
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: No such file or directory
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------
| COMPILEDEP |
--------------
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 6.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
----------------------
| Scan Configuration |
----------------------
scanext Scan-SANE-Extension REQUIRED - 3.16.11 OK -
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.16.11 OK 'hpaio found in /etc/sane.d/dll.conf'
-------------------------
| External Dependencies |
-------------------------
dbus DBus - Message bus system REQUIRED - 1.10.32 OK -
(xsane:7050): Gtk-WARNING **: cannot open display:
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - INCOMPAT 'xsane needs to be installed'
avahi-utils avahi-utils OPTIONAL - 0.6.32 OK -
network network -wget OPTIONAL - 1.18 OK -
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.1 OK 'CUPS Scheduler is running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.25 OK -
------------------------
| General Dependencies |
------------------------
sane-devel SANE - Scanning library development files REQUIRED - - OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.4 OK -
python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.4 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.5.3 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.2.1 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.1 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.3.0 OK -
python3-xml Python XML libraries REQUIRED - 2.2.0 OK -
python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 4.11.4 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.24' OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.5.3 OK -
sane SANE - Scanning library REQUIRED - - OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 OK -
---------------------
| Python Extentions |
---------------------
hpmudext IO-Extension REQUIRED - 3.16.11 OK -
cupsext CUPS-Extension REQUIRED - 3.16.11 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/HP_LaserJet_MFP_M129-M134?serial=VNFVG04495' is a Hewlett-Packard HP_LaserJet_MFP_M129-M134 all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
--------------------------------------------------- -------------------------
hp:/usb/HP_LaserJet_MFP_M129-M134?serial=VNFVG04495 HP LaserJet MFP M129-M134
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_LaserJet_MFP_M129-M134
-------------------------
Type: Unknown
Device URI: usb://HP/LaserJet%20MFP%20M129-M134?serial=VNFVG04495
PPD: /etc/cups/ppd/HP_LaserJet_MFP_M129-M134.ppd
PPD Description: HP LaserJet MFP m129-m134 hpijs, 3.16.11
Printer Filter faileder HP_LaserJet_MFP_M129-M134 is idle. enabled since 2022年01月25日 星期二 13时54分22秒
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
HP_LaserJet_MFP_M129-M134_fax
-----------------------------
Type: Fax
Device URI: hpfax:/usb/HP_LaserJet_MFP_M129-M134?serial=VNFVG04495
PPD: /etc/cups/ppd/HP_LaserJet_MFP_M129-M134_fax.ppd
PPD Description: HP Fax2 hpcups
Printer status: printer HP_LaserJet_MFP_M129-M134_fax is idle. enabled since 2022年01月25日 星期二 13时29分08秒
Communication status: Good
--------------
| PERMISSION |
--------------
USB None Required - - OK Node:'/dev/bus/usb/001/002' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
error: 'xsane' package is missing/incompatible
Total Errors: 1
Total Warnings: 2
Done.
HP_LaserJet_MFP_M129-M134 HP LaserJet MFP M129-M134 Local Printer HP LaserJet MFP m129-m134 hpijs, 3.16.11 Idle - "Filter failed"
帮忙看看问题出在哪里万分感谢！