Arduino开发板上传程序失败

##以下是出错提示：
Arduino:1.8.5 (Windows 10), 开发板："Arduino Pro or Pro Mini, ATmega168 (5V, 16 MHz)"

项目使用了 8324 字节，占用了 (58%) 程序存储空间。最大为 14336 字节。
全局变量使用了504字节，(49%)的动态内存，余留520字节局部变量。最大为1024字节。
avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xdc avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xdc avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xdc avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xdc avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xdc avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xdc avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xdc avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xdc avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xdc avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xdc
上传出错。查看http://www.arduino.cc/en/Guide/Troubleshooting#upload 获取建议。

在文件 -> 首选项开启
“编译过程中显示详细输出”选项
这份报告会包含更多信息。

##求解决方法

#出错提示不容易看，有图片：

img

图为上传画面：

img