After reading Hidden Features and Dark Corners of C++/STL on comp.lang.c++.moderated, I was completely surprised that the following snippet compiled and worked in both Visual Studio 2008 and G++ 4.4.
Here's the code:
#include <stdio.h>
int main()
{
int x = 10;
while (x --> 0) // x goes to 0
{
printf("%d ", x);
}
}
I'd assume this is C, since it works in GCC as well. Where is this defined in the standard, and where has it come from?
转载于:https://stackoverflow.com/questions/1642028/what-is-the-operator-in-c
Pay attention
-->is not an operator. It is in fact two separate operators,--and>.
The conditional's code decrements x, while returning x's original (not decremented) value, and then compares the original value with 0 using the > operator.
To better understand, the statement could be written as follows:
while((x--) > 0)
while( x-- > 0 )
is how that's parsed.
This code first compares x and 0 and then decrements x. (Also said in the first answer: You're post-decrementing x and then comparing x and 0 with the > operator.) See the output of this code:
9 8 7 6 5 4 3 2 1 0
We now first compare and then decrement by seeing 0 in the output.
If we want to first decrement and then compare, use this code:
#include <stdio.h>
int main(void)
{
int x = 10;
while( --x> 0 ) // x goes to 0
{
printf("%d ", x);
}
return 0;
}
That output is:
9 8 7 6 5 4 3 2 1
It's equivalent to
while (x-- > 0)
x-- (post decrement) is equivalent to x = x-1 so, the code transforms to:
while(x > 0) {
x = x-1;
// logic
}
That's a very complicated operator, so even ISO/IEC JTC1 (Joint Technical Committee 1) placed its description in two different parts of the C++ Standard.
Joking aside, they are two different operators: -- and > described respectively in §5.2.6/2 and §5.9 of the C++03 Standard.
Anyway, we have a "goes to" operator now. "-->" is easy to be remembered as a direction, and "while x goes to zero" is meaning-straight.
Furthermore, it is a little more efficient than "for (x = 10; x > 0; x --)" on some platforms.
There is a space missing between -- and >. x is post decremented, that is, decremented after checking the condition x>0 ?.
It's
#include <stdio.h>
int main(void){
int x = 10;
while( x-- > 0 ){ // x goes to 0
printf("%d ", x);
}
return 0;
}
Just the space make the things look funny, -- decrements and > compares.
The usage of --> has historical relevance. Decrementing was (and still is in some cases), faster than incrementing on the x86 architecture. Using --> suggests that x is going to 0, and appeals to those with mathematical backgrounds.
This is exactly the same as
while (x--)
{
printf("%d ", x);
}
for non-negative numbers
My compiler will print out 9876543210 when I run this code.
#include <iostream>
int main()
{
int x = 10;
while( x --> 0 ) // x goes to 0
{
std::cout << x;
}
}
As expected. The while( x-- > 0 ) actually means while( x > 0). The x-- post decrements x.
while( x > 0 )
{
x--;
std::cout << x;
}
is a different way of writing the same thing.
It is nice that the original looks like "while x goes to 0" though.
One book I read (I don't remember correctly which book) stated: Compilers try to parse expressions to the biggest token by using the left right rule.
In this case, the expression:
x-->0
Parses to biggest tokens:
token 1: x
token 2: --
token 3: >
token 4: 0
conclude: x-- > 0
The same rule applies to this expression:
a-----b
After parse:
token 1: a
token 2: --
token 3: --
token 4: -
token 5: b
conclude: (a--)-- - b
I hope this helps to understand the complicated expression ^^
Utterly geek, but I will be using this:
#define as ;while
int main(int argc, char* argv[])
{
int n = atoi(argv[1]);
do printf("n is %d\n", n) as ( n --> 0);
return 0;
}
Or for something completely different... x slides to 0
while (x --\
\
\
\
> 0)
printf("%d ", x);
Not so mathematical, but... every picture paints a thousand words...
Actually, x is post-decrementing and with that condition is being checked. It's not -->, it's (x--) > 0
Note: value of x is changed after the condition is checked, because it post-decrementing. Some similar cases can also occur, for example:
--> x-->0
++> x++>0
-->= x-->=0
++>= x++>=0
It's a combination of two operators. First -- is for decrementing the value, and > is for checking whether the value is greater than the right-hand operand.
#include<stdio.h>
int main()
{
int x = 10;
while (x-- > 0)
printf("%d ",x);
return 0;
}
The output will be:
9 8 7 6 5 4 3 2 1 0
C and C++ obey the "maximum munch" rule. The same way a---b is translated to (a--) - b, in your case x-->0 translates to (x--)>0.
What the rule says essentially is that going left to right, expressions are formed by taking the maximum of characters which will form an valid expression.
x can go to zero even faster in the opposite direction:
int x = 10;
while( 0 <---- x )
{
printf("%d ", x);
}
8 6 4 2
You can control speed with an arrow!
int x = 100;
while( 0 <-------------------- x )
{
printf("%d ", x);
}
90 80 70 60 50 40 30 20 10
;)
Why all the complication?
The simple answer to the original question is just :
#include <stdio.h>
int main()
{
int x = 10;
while (x > 0)
{
printf("%d ", x);
x = x-1;
}
}
Does the same thing. Not saying you should do it like this, but it does the same thing and would have answered the question in one post.
The x-- is just shorthand for the above, and > is just a normal greater-than operator. No big mystery!
There's too much people making simple things complicated nowadays ;)
Conventional way we define condition in while loop parenthesis"()" and terminating condition inside the braces"{}", but this -- & > is a way one defines all at once. For e.g:
int abc(){
int a = 5
while((a--) > 0){ // Decrement and comparison both at once
// Code
}
}
It says, decrement a and run the loop till the time a is greater than 0
Other way it should have been like:
int abc(){
int a = 5
while(a > 0){
// Code
a = a -1 // Decrement inside loop
}
}
both ways, we do the same thing and achieve the same goals.