防止控制台窗口关闭在 visualstudio c / c + + 控制台应用上

This is a probably an embarasing question as no doubt the answer is blindingly obvious.

I've used Visual Studio for years, but this is the first time I've done any 'Console Application' development.

When I run my application the console window pops up, the program output appears and then the window closes as the application exits.

Is there a way to either keep it open until I have checked the output, or view the results after the window has closed?

If you run without debugging (Ctrl+F5) then by default it prompts your to press return to close the window. If you want to use the debugger, you should put a breakpoint on the last line.

If you're using .NET, put Console.ReadLine() before the end of the program.

It will wait for <ENTER>.

You could run your executable from a command prompt. This way you could see all the output. Or, you could do something like this:

int a = 0;
scanf("%d",&a);

return YOUR_MAIN_CODE;

and this way the window would not close until you enter data for the a variable.

add “| pause” in command arguments box under debugging section at project properties.

Use console.readline. Yours is writing the line but not reading it.

Here is a way for C/C++:

#include <stdlib.h>

#ifdef _WIN32
    #define WINPAUSE system("pause")
#endif

Put this at the top of your program, and IF it is on a Windows system (#ifdef _WIN32), then it will create a macro called WINPAUSE. Whenever you want your program to pause, call WINPAUSE; and it will pause the program, using the DOS command. For other systems like Unix/Linux, the console should not quit on program exit anyway.

Goto Debug Menu->Press StartWithoutDebugging

Right click on your project

Properties>Configuration Properties> Linker> System

select Console (/SUBSYSTEM:CONSOLE) in SubSystem option.

Now try it...it should work

try to call getchar() right before main() returns.

(/SUBSYSTEM:CONSOLE) did not worked for my vs2013 (I already had it).

"run without debugging" is not an options, since I do not want to switch between debugging and seeing output.

I ended with

int main() {
  ...
#if _DEBUG
  LOG_INFO("end, press key to close");
  getchar();
#endif // _DEBUG
  return 0;
}

Solution used in qtcreator pre 2.6. Now while qt is growing, vs is going other way. As I remember, in vs2008 we did not need such tricks.

Just press CNTRL + F5 to open it in an external command line window (Visual Studio does not have control over it).

If this doesn't work then add the following to the end of your code:

Console.WriteLine("Press any key to exit...");
Console.ReadKey();

This wait for you to press a key to close the terminal window once the code has reached the end.

If you want to do this in multiple places, put the above code in a method (e.g. private void Pause()) and call Pause() whenever a program reaches a possible end.

Here's a solution that (1) doesn't require any code changes or breakpoints, and (2) pauses after program termination so that you can see everything that was printed. It will pause after either F5 or Ctrl+F5. The major downside is that on VS2013 Express (as tested), it doesn't load symbols, so debugging is very restricted.

1. Create a batch file. I called mine runthenpause.bat, with the following contents:

   %1 %2 %3 %4 %5 %6 %7 %8 %9
   pause
   

   The first line will run whatever command you provide and up to eight arguments. The second line will... pause.

2. Open the project properties | Configuration properties | Debugging.

3. Change "Command Arguments" to $(TargetPath) (or whatever is in "Command").
4. Change "Command" to the full path to runthenpause.bat.
5. Hit OK.

Now, when you run, runthenpause.bat will launch your application, and after your application has terminated, will pause for you to see the console output.

I will post an update if I figure out how to get the symbols loaded. I tried /Z7 per this but without success.

Visual Studio 2015, with imports. Because I hate when code examples don't give the needed imports.

#include <iostream>;

int main()
{
    getchar();
    return 0;
}

A somewhat better solution:

atexit([] { system("PAUSE"); });

at the beginning of your program.

Pros:

• can use std::exit()
• can have multiple returns from main
• you can run your program under the debugger
• IDE independent (+ OS independent if you use the cin.sync(); cin.ignore(); trick instead of system("pause");)

Cons:

• have to modify code
• won't pause on std::terminate()
• will still happen in your program outside of the IDE/debugger session; you can prevent this under Windows using:

extern "C" int __stdcall IsDebuggerPresent(void);
int main(int argc, char** argv) {
    if (IsDebuggerPresent())
        atexit([] {system("PAUSE"); });
    ...
}

just put as your last line of code:

system("pause");

Either use:

1. cin.get();

or

2. system("pause");

Make sure to make either of them at the end of main() function and before the return statement.

You can also use this option

#include <conio.h> 
/* run this program using the console pauser or add your own getch, system("pause") or input loop */
int main() {
   .
   .
   .
   getch(); 

   return 0;
}