Sql Server语句改为为Orcale语句

  CREATE TABLE [dbo].[Table_1](
    [ID] [nvarchar](50) NULL,
    [Material] [nvarchar](50) NULL,
    [Projects] [nvarchar](50) NULL,
    [Calculate] [nvarchar](50) NULL,
    [Datass] [nvarchar](50) NULL,
    [Formula] [nvarchar](50) NULL,
    [Tolerance] [nvarchar](50) NULL,
    [Standard] [nvarchar](50) NULL
) ON [PRIMARY]

GO
INSERT INTO [Table_1] VALUES (1, '硫酸亚铁_含量', '质量', '否', 10, '', '', '');
INSERT INTO [Table_1] VALUES (2, '硫酸亚铁_含量', '体积', '否', 20, '', '', '');
INSERT INTO [Table_1] VALUES (3, '硫酸亚铁_含量', '标液', '否', 30, '', '', '');
INSERT INTO [Table_1] VALUES (4, '硫酸亚铁_含量', '含量', '是', '', ' 体积*标液*0.27801/质量', '≤0.4%', '');
INSERT INTO [Table_1] VALUES (5, '硫酸亚铁_二氧化钛', '质量1', '否', 0.25, '', '', '');
INSERT INTO [Table_1] VALUES (6, '硫酸亚铁_二氧化钛', '质量2', '否', 0.35, '', '', '');
INSERT INTO [Table_1] VALUES (7, '硫酸亚铁_二氧化钛', 'm', '否', 0.45, '', '', '');
INSERT INTO [Table_1] VALUES (8, '硫酸亚铁_二氧化钛', '含量', '是', '', '5*m/质量1', '≤0.02%', '');
INSERT INTO [Table_1] VALUES (9, '硫酸亚铁_水不溶物', '质量1', '否', 0.11, '', '', '');
INSERT INTO [Table_1] VALUES (10, '硫酸亚铁_水不溶物', 'm1', '否', 0.66, '', '', '');
INSERT INTO [Table_1] VALUES (11, '硫酸亚铁_水不溶物', 'm2', '否', 0.88, '', '', '');
INSERT INTO [Table_1] VALUES (12, '硫酸亚铁_水不溶物', '含量', '是', '', '(m2-m1)/质量1', '≤0.04%', '');
INSERT INTO [Table_1] VALUES (13, '烧碱', '质量', '否', 0.99, '', '', '');
INSERT INTO [Table_1] VALUES (14, '烧碱', '体积', '否', 0.44, '', '', '');
INSERT INTO [Table_1] VALUES (15, '烧碱', '标液', '否', 11.5, '', '', '');
INSERT INTO [Table_1] VALUES (16, '烧碱', '含量', '是', '', '体积*标液*0.8/质量', '≤0.1%', '≥30.0%');
INSERT INTO [Table_1] VALUES (17, '双氧水_含量', '质量', '否', 1.56, '', '', '');
INSERT INTO [Table_1] VALUES (18, '双氧水_含量', '体积', '否', 1.913, '', '', '');
INSERT INTO [Table_1] VALUES (19, '双氧水_含量', '标液', '否', 1.55, '', '', '');
INSERT INTO [Table_1] VALUES (20, null, null, null, null, null, null, null);

DECLARE @Material VARCHAR(20),@Projects VARCHAR(20),@Datass NUMERIC(6,4),@Formula VARCHAR(50),@Sql VARCHAR(50)
DECLARE my_cur1 CURSOR FOR --读取Material的公式
SELECT Material FROM Table_1 WHERE Calculate='是'
OPEN my_cur1

FETCH NEXT FROM my_cur1 INTO @Material
WHILE @@FETCH_STATUS=0
BEGIN
SELECT @Formula = Formula FROM Table_1 WHERE Material=@Material

DECLARE my_cur2 CURSOR FOR --读取Project
SELECT Projects FROM Table_1 WHERE Material=@Material AND Calculate<>'是'
OPEN my_cur2
FETCH NEXT FROM my_cur2 INTO @Projects
WHILE @@FETCH_STATUS=0
BEGIN
SELECT @Datass=Datass FROM Table_1 WHERE Material=@Material AND Projects=@Projects
SET @Formula=REPLACE(@Formula,@Projects,@Datass) --replace替换公式
FETCH NEXT FROM my_cur2 INTO @Projects
END
PRINT @Material 
PRINT @Formula 

SET @Sql='select '+@Formula
EXEC (@Sql)
PRINT @Datass

CLOSE my_cur2
DEALLOCATE my_cur2

FETCH NEXT FROM my_cur1 INTO @Material
END
CLOSE my_cur1
DEALLOCATE my_cur1

并且把结果添加到临时表 显示出所有项，

我建议你有时间的话可以自己研究研究，反正可以上网，不懂得就百度下。不然网络用来干嘛的，不就用来学习的啊。什么都别人帮你弄好对你的成长没啥好处的

他它俩语法大部分一样，可以先贴过去试试

写法跟oracle 差不多 不用go 变量名一般不用@开头 写出存储过程
declare
name varchar(50);
begin
end;

CREATE TABLE test_table(
id number NULL,
Material varchar(50) NULL,
Projects varchar(50) NULL,
Calculate varchar(50) NULL,
Datass varchar(50) NULL,
Formula varchar(50) NULL,
Tolerance varchar(50) NULL,
Standard1 varchar(50) NULL
)

INSERT INTO test_table VALUES (1, '硫酸亚铁_含量', '质量', '否', 10, '', '', '');
INSERT INTO test_table VALUES (2, '硫酸亚铁_含量', '体积', '否', 20, '', '', '');
INSERT INTO test_table VALUES (3, '硫酸亚铁_含量', '标液', '否', 30, '', '', '');
INSERT INTO test_table VALUES (4, '硫酸亚铁_含量', '含量', '是', '', ' 体积*标液*0.27801/质量', '≤0.4%', '');
INSERT INTO test_table VALUES (5, '硫酸亚铁_二氧化钛', '质量1', '否', 0.25, '', '', '');
INSERT INTO test_table VALUES (6, '硫酸亚铁_二氧化钛', '质量2', '否', 0.35, '', '', '');
INSERT INTO test_table VALUES (7, '硫酸亚铁_二氧化钛', 'm', '否', 0.45, '', '', '');
INSERT INTO test_table VALUES (8, '硫酸亚铁_二氧化钛', '含量', '是', '', '5*m/质量1', '≤0.02%', '');
INSERT INTO test_table VALUES (9, '硫酸亚铁_水不溶物', '质量1', '否', 0.11, '', '', '');

DECLARE Material VARCHAR(20),@Projects VARCHAR(20),@Datass NUMERIC(6,4),@Formula VARCHAR(50),@Sql VARCHAR(50)
my_cur1 CURSOR FOR --读取Material的公式
SELECT Material FROM Table_1 WHERE Calculate='是'
OPEN my_cur1
begin
FETCH NEXT FROM my_cur1 INTO @Material
WHILE @@FETCH_STATUS=0
BEGIN
SELECT @Formula = Formula FROM Table_1 WHERE Material=@Material

DECLARE my_cur2 CURSOR FOR --读取Project
SELECT Projects FROM Table_1 WHERE Material=@Material AND Calculate<>'是'
OPEN my_cur2
FETCH NEXT FROM my_cur2 INTO @Projects
WHILE @@FETCH_STATUS=0
BEGIN
SELECT @Datass=Datass FROM Table_1 WHERE Material=@Material AND Projects=@Projects
SET @Formula=REPLACE(@Formula,@Projects,@Datass) --replace替换公式
FETCH NEXT FROM my_cur2 INTO @Projects
END
PRINT @Material
PRINT @Formula

SET @Sql='select '+@Formula
EXEC (@Sql)
PRINT @Datass

CLOSE my_cur2
DEALLOCATE my_cur2

FETCH NEXT FROM my_cur1 INTO @Material
END
CLOSE my_cur1
DEALLOCATE my_cur1

http://download.csdn.net/download/shaoyy/3694238
你去这个网址下载这个东西看看行不行，我刚找到的，不过没试过。本来想装个Orcale帮你试试，但是这边没有安装包，懒得下载去了