想深入学习一下ping程序，但现在找到的代码都不能用。。。。求大神帮在linux下用C写一个ping程序。。。
百度一下就有很多的http://blog.csdn.net/junlixxu/article/details/5717788
http://www.cnblogs.com/linuxer/archive/2012/06/20/2870517.html
void statistics(int signo)
{ printf("\n--------------------PING statistics-------------------\n");
printf("%d packets transmitted, %d received , %d%% lost\n",
nsend,nreceived,(nsend-nreceived)/nsend*100);
close(sockfd);
exit(1);
}
/*校验和算法*/
unsigned short cal_chksum(unsigned short *addr,int len)
{ int nleft=len;
int sum=0;
unsigned short *w=addr;
unsigned short answer=0;
/*把ICMP报头二进制数据以2字节为单位累加起来*/
while(nleft>1)
{ sum+=*w++;
nleft-=2;
}
/*若ICMP报头为奇数个字节，会剩下最后一字节。把最后一个字节视为一个2字节数据的高
//字节，这个2字节数据的低字节为0，继续累加*/
if( nleft==1)
{ *(unsigned char *)(&answer)=*(unsigned char *)w;
sum+=answer;
}
sum=(sum>>16)+(sum&0xffff);
sum+=(sum>>16);
answer=~sum;
return answer;
}
/*设置ICMP报头*/
int pack(int pack_no)
{ int i,packsize;
struct icmp *icmp;
struct timeval *tval;
icmp=(struct icmp*)sendpacket;
icmp->icmp_type=ICMP_ECHO;
icmp->icmp_code=0;
icmp->icmp_cksum=0;
icmp->icmp_seq=pack_no;
icmp->icmp_id=pid;
packsize=8+datalen;
tval= (struct timeval *)icmp->icmp_data;
gettimeofday(tval,NULL); /*记录发送时间*/
icmp->icmp_cksum=cal_chksum( (unsigned short *)icmp,packsize); /*校验算法*/
return packsize;
}
/*发送三个ICMP报文*/
void send_packet()
{ int packetsize;
while( nsend<MAX_NO_PACKETS) //发送MAX_NO_PACKETS个ICMP报文
{
nsend++;
packetsize=pack(nsend); /*设置ICMP报头*/
//sendpacket为要发送的内容，由pack()函数设定，dest_addr是目的地址，
if( sendto(sockfd,sendpacket,packetsize,0,
(struct sockaddr *)&dest_addr,sizeof(dest_addr) )<0 )
{ perror("sendto error");
continue;
}
sleep(1); /*每隔一秒发送一个ICMP报文*/
}
}
/*接收所有ICMP报文*/
void recv_packet()
{ int n,fromlen;
extern int errno;
signal(SIGALRM,statistics);
fromlen=sizeof(from);
while( nreceived<nsend)
{
//alarm()用来设置信号SIGALRM在经过参数seconds指定的秒数后传送给目前的进程
alarm(MAX_WAIT_TIME);
if( (n=recvfrom(sockfd,recvpacket,sizeof(recvpacket),0,
(struct sockaddr *)&from,&fromlen)) <0)
{ if(errno==EINTR) continue;
perror("recvfrom error");
continue;
}
gettimeofday(&tvrecv,NULL); /*记录接收时间*/
if(unpack(recvpacket,n)==-1)continue;
nreceived++;
}
}
/*剥去ICMP报头*/
int unpack(char *buf,int len)
{ int i,iphdrlen;
struct ip *ip;
struct icmp *icmp;
struct timeval *tvsend;
double rtt;
ip=(struct ip *)buf;
//求ip报头长度,即ip报头的长度标志乘4,头长度指明头中包含的4字节字的个数。可接受
//的最小值是5，最大值是15
iphdrlen=ip->ip_hl<<2;
icmp=(struct icmp *)(buf+iphdrlen); /*越过ip报头,指向ICMP报头*/
len-=iphdrlen; /*ICMP报头及ICMP数据报的总长度*/
if( len<8) /*小于ICMP报头长度则不合理*/
{ printf("ICMP packets\'s length is less than 8\n");
return -1;
}
/*确保所接收的是我所发的的ICMP的回应*/
if( (icmp->icmp_type==ICMP_ECHOREPLY) && (icmp->icmp_id==pid) )
{ tvsend=(struct timeval *)icmp->icmp_data;
tv_sub(&tvrecv,tvsend); /*接收和发送的时间差*/
rtt=tvrecv.tv_sec*1000+tvrecv.tv_usec/1000; /*以毫秒为单位计算rtt*/
/*显示相关信息*/
printf("%d byte from %s: icmp_seq=%u ttl=%d rtt=%.3f ms\n",
len,inet_ntoa(from.sin_addr),icmp->icmp_seq,ip->ip_ttl,rtt);
}
else return -1;
}
int main(int argc,char *argv[])
{ struct hostent *host;
struct protoent *protocol;
unsigned long inaddr=0l;
int waittime=MAX_WAIT_TIME; //#define MAX_WAIT_TIME 5
int size=50*1024;
if(argc<2)
{ printf("usage:%s hostname/IP address\n",argv[0]);
exit(1);
}
//getprotobyname("icmp")返回对应于给定协议名的包含名字和协议号的protoent结构指针。
if( (protocol=getprotobyname("icmp") )==NULL)
{ perror("getprotobyname");
exit(1);
}
/*生成使用ICMP的原始套接字,这种套接字只有root才能生成*/
if( (sockfd=socket(AF_INET,SOCK_RAW,protocol->p_proto) )<0)
{ perror("socket error");
exit(1);
}
/* 回收root权限,设置当前用户权限*/
setuid(getuid());
/*扩大套接字接收缓冲区到50K这样做主要为了减小接收缓冲区溢出的
的可能性,若无意中ping一个广播地址或多播地址,将会引来大量应答*/
setsockopt(sockfd,SOL_SOCKET,SO_RCVBUF,&size,sizeof(size) );
bzero(&dest_addr,sizeof(dest_addr));
dest_addr.sin_family=AF_INET;
/*判断是主机名还是ip地址*/
if( inaddr=inet_addr(argv[1])==INADDR_NONE)
{ if((host=gethostbyname(argv[1]) )==NULL) /*是主机名*/
{ perror("gethostbyname error");
exit(1);
}
memcpy( (char *)&dest_addr.sin_addr,host->h_addr,host->h_length);
}
else /*是ip地址*/
dest_addr.sin_addr.s_addr = inet_addr(argv[1]);
/*获取main的进程id,用于设置ICMP的标志符*/
pid=getpid();
printf("PING %s(%s): %d bytes data in ICMP packets.\n",argv[1],
inet_ntoa(dest_addr.sin_addr),datalen);
send_packet(); /*发送所有ICMP报文*/
recv_packet(); /*接收所有ICMP报文*/
statistics(SIGALRM); /*进行统计*/
return 0;
}
/*两个timeval结构相减*/
void tv_sub(struct timeval *out,struct timeval *in)
{ if( (out->tv_usec-=in->tv_usec)<0)
{ --out->tv_sec;
out->tv_usec+=1000000;
}
out->tv_sec-=in->tv_sec;
}
可以参看linux内核源代码，busybox里面就有ping命令的实现