通过蓝牙发送AT指令给手机，
使用AT+CLIP?和AT+CLIP=?发送手机时，返回error请问是否有人做个相关开发，希望能指教下
蓝牙的号码显示不是 CLIP 哦，这个要看 BT 的手册。
CLIP 是用于来电显示的，不能用于发送，只能用于接收。
你用的 BT 模块是什么？通过 BT 模块与手册连接，是想拔打电话吗？
AT+CLIP 是发送 呼叫线确认陈述 和来电显示有关？
用蓝牙的话可以实现重拨号码的功能，直接拨号好像实现不了
This command refers to the GSM/UMTS supplementary service CLIP
(Calling Line Identification Presentation) that enables a called
subscriber to get the calling line identity (CLI) of the calling party
when receiving a mobile terminated call. Set command enables or
disables the presentation of the CLI at the TE. It has no effect on the
execution of the supplementary service CLIP in the network.
When the presentation of the CLI at the TE is enabled (and calling
subscriber allows), +CLIP: , [, ,
[, [] [, ]]] response is returned after every RING
(or +CRING: ; refer subclause "Cellular result codes +CRC")
result code sent from TA to TE. It is manufacturer specific if this
response is used when normal voice call is answered
Response
OK / ERROR
Parameter
(parameter sets/shows the result code presentation status in the
MT/TA):
0 disable
1 enable
(parameter shows the subscriber CLIP service status in the
network):
0 CLIP not provisioned
1 CLIP provisioned
2 unknown (e.g. no network, etc.)
: string type phone number of format specified by
: type of address octet in integer format (refer TS 24.008
subclause 10.5.4.7)
: string type subaddress of format specified by
: type of subaddress octet in integer format (refer TS 24.008
subclause 10.5.4.8)
: optional string type alphanumeric representation of
corresponding to the entry found in phonebook; used
character set should be the one selected with command Select TE
Character Set +CSCS
:
0 CLI valid
T5300 AT Command Set User Manual
Page 54 of 288
1 CLI has been withheld by the originator.
2 CLI is not available due to interworking problems or limitations of
originating network.